In this chapter, all formats of messages are described. Messages of a specified type can be requested using flags (see their list below):

All flags are only used in DEC format.

Messages types:

In order to delete specific messages you must have the following ACL-flags:

More info you can get from ACL-flags.

Flag - 0x0000

{
	"t":<uint>,		/* message time (UTC) */
	"f":<uint>,		/* flags (see below)*/
	"tp":"ud",		/* message type (ud - message with data) */
	"pos":{			/* position */
		"y":<double>,		/* latitude */
		"x":<double>,		/* longitude */
		"z":<int>,		/* altitude */
		"s":<uint>		/* speed */
		"c":<uint>,		/* course */
		"sc":<ubyte>		/* satellites count */
	},
	"i":<uint>,		/* input data */
	"o":<uint>,		/* output data */
	"p":{			/* parameters */
		<text>:<double>,
		...	
	},
        "lc":<int>,		/* lbs message checksum */
	"rt":<uint>		/* message registration time (UTC) */
}

Flags of messages with data:

Flag - 0x0100(256)

{
	"t":<uint>,	/* message time (UTC) */
	"f":<uint>,	/* flags: SMS messages has no flags, therefore 0 will be placed */
	"tp":"us",	/* message type (us - SMS message) */
	"st":<text>,	/* text of message */
	"mp":<text>,	/* modem phone number */
	"p":{}		/* parameters */
}

Flag - 0x0200(512)

{
	"t":<uint>,	/* message time (UTC) */
	"f":<uint>,	/* flags: messages with commands has no flags, therefore 0 will be placed */
	"tp":"ucr",	/* message type (ucr - command) */
	"ca":<text>,	/* command name */
	"cn":<text>,	/* command type */
	"cp":<text>,	/* command parameters */
	"ui":<uint>,	/* user ID */
	"ln":<text>,	/* link name */
	"lt":<text>,	/* link type */
	"et":<uint>,	/* execution time */
	"p":{}		/* parameters */
}

Link types are described i chapter Commands: create, edit, delete.

Flag - 0x0600(1536)

{
	"t":<uint>,	/* message time (UTC) */
	"f":<uint>,	/* flags (see below) */
	"tp":"evt",	/* message type (evt - event) */
	"et":<text>,	/* text of event */
	"x":<double>,	/* longitude */
	"y":<double>,	/* latitude */
	"p":{}		/* parameters */
}

Event flags:

Flag - 0x0300(768)

{
	"t":<uint>,	/* message time (UTC) */
	"f":<uint>,	/* flags: messages with notifications has no flags, therefore 0 will be placed */
	"tp":"xx",	/* message type */
	"p":{}		/* parameters */
}

Flag - 0x0500(1280)

{
	"t":<uint>,	/* message time (UTC) */
	"f":<uint>,	/* flags: 0x1 - is set when message contains information about payment */
	"tp":"xx",	/* message type */
	"p":{}		/* parameters */
}

Flag - 0x0900(2304)

{
	"t":<uint>,	/* message time (UTC) */
	"f":<uint>,	/* flags: 0x1 - is set when message is sent */
	"tp":"xx",	/* message type */
	"p":{		/* parameters */
		"phone":<text>,		/* phone number */
		"sms_text":<text>,	/* sms text */
		"driver_name":<text>,	/* driver name */
		"driver_id":<uint>	/* driver ID */
	}
}

Flag - 0x1000(4096)

{
	"t":<uint>,	/* message time (UTC) */
	"f":4096,	/* flags: 4096 - log messages */
	"tp":"xx",	/* message type */
	"p":{		/* parameters */
		"user":<text>,		/* user name */
		"action":<text>,	/* action */
		"host":<text>,		/* host */
		"p1":<text>,		/* parameters */
		...		
	}
}

wln messages format.

REG;time;lon;lat;speed;course;double params;int params;text params;long params;boolean params;

Inside the section parameters separated by commas.

Example

REG;1466585078;30.4367027283;59.7207145691;1;273;ALT:24.0,adc1:0.0,adc2:25.57,adc3:0.0,adc4:0.0,adc5:0.0,adc6:0.0,fuel1:0.0,fuel2:170.0,fuel3:0.0,odometer:7293607.0,acc:0.0,pwr_int:0.731,pwr_ext:25.751,hdop:1.7;in13:1,,SATS:5,count1:1,count2:0,temp1:0,temp2:23,temp3:0,sats_glonass:0,sats_gps:5;soft_version:"44";;;